Page 1 of 1

Spring clean

Posted: Sat, 10 Mar 2007, 7:05 pm
by Snorbs
Decided to give the Portafold a spring clean today,its been in the garage since November shut up. When we opened it up we found out it's gone a bit mouldy :roll:

At least the cushions and everything else was ok, just needed cleaning. Since we last painted it 5 years ago thought it might be time for a colour change as well, one coat done today, another tommorrow :shock:

Posted: Sat, 10 Mar 2007, 9:21 pm
by Admin
What shade of yellow did you say that was?

and you're not allowed to use the language you used earlier :lol:

Cleaning quilting

Posted: Sat, 10 Mar 2007, 9:52 pm
by Sara
Just to re-assure people who have just erected their Portafold (or Ansfold) after a long winter lay-up and found that their interior quilting is now covered in meldew, all is not lost.

This mould and dirt is not just a winters worth though, this is years of grime, but it is a good advert for keeping your original quilting in favour of something else.

Armed with a toothbrush, some AutoSmart fabric cleaner and a lot of arm ache, your quilting can look as good as new.

An example of our 'after' and 'before':
Quilting 1.JPG

Posted: Sat, 10 Mar 2007, 9:55 pm
by Snorbs
The proper name is lemon ice, bathroom / kitchen emulsion (it was left over from our kitchen), but i prefer the other name for it.

Posted: Mon, 12 Mar 2007, 1:51 pm
by petman
looks like mine was glossed in the past, looks OK but would like to change the colour. any suggestions on what to use

Posted: Mon, 12 Mar 2007, 1:57 pm
by Admin
Although it's still undecided on what paint to use on the outside, the general consensus for the paint to use on the inside is a good quality kitchen and bathroom paint that resists mildew.

Hopefully it will reduce the amount of work needed come spring time.

Posted: Mon, 11 Jun 2007, 9:04 am
by Admin
Just put our portafold up for the first time after painting the inside and found that even though we used good quality mould resistant paint, for the next couple of hours I will be cleaning mould off the inside! At least we have room in our garage at last to store it this coming winter, hope that will prevent it from going as mouldy.

Painting the inside

Posted: Mon, 18 Jun 2007, 7:31 pm
by txfsealord
I haven't got as far as actual decorating yet, but I have got to put something on bare wooden surfaces of furniture I've made. I suppose I ought to use yacht varnish for this, but it takes a long time to brush on & even longer to dry between coats. So I'm trying car body lacquer in aerosol form (it's used to deepen the shine on metallic paintwork, called clear-over-base) the aerosols are sold by all car accessory shops. They don't go far as the plywood mops it up like a sponge, but it's fantastic quick & I'm in a hell of a hurry! It'll be most interesting to see how it withstands use/damp/heat etc. I think it's acrylic base these days (always used to be cellulose, dear ole stuff I loved it) but hey, it stands up to outside year-round weather on cars OK.

So next question, why can't we use car paint, with suitable fibreglas primer, inside our vans?