The 13th International Portafold & Ansfold Gathering) (i.e. 2022)

After setting a new world record of 63 last year, we'll be returning to the Newbury Retrofestival.

So put the dates 12th, 13th & 14th of August 2022 in your diary now and get those dates booked off work early.

Show Address: Newbury Showground, Priors Court, Hermitage, Thatcham, West Berkshire, RG18 9QZ

Don't book direct with the show organisers, just contact me (07771544419) to get your pitch saved.

Ride height

Chat and Questions on Wheels, Tyres & Hubcaps.
Post Reply
JamesM
Posts: 3
Joined: Tue, 03 Aug 2021, 7:41 pm
Location: Winchester, Hampshire

Ride height

Post by JamesM » Tue, 24 Aug 2021, 3:52 pm

Some of you will have seen I'm towing mine behind a Land Rover. It's a real challenge to get the towbar low enough to keep the portafold level.

Anyone had success with raising the ride height e.g. spacers between the frame and suspension, bigger wheels...

User avatar
Admin
Posts: 805
Joined: Sun, 05 Nov 2006, 8:53 pm
Location: Christchurch, Dorset

Re: Ride height

Post by Admin » Tue, 24 Aug 2021, 4:03 pm

You could try fitting 12" wheels as per the early vans.

There's some good info from the late Steve Lord about wheels on these threads:

viewtopic.php?f=11&t=118

http://www.portafold.co.uk/forum/viewto ... ?f=9&t=178

http://www.portafold.co.uk/forum/viewtopic.php?t=144
Matthew
portafold.co.uk
----------------------------------------------------------------------------------
Wanted: Any original Portafold, Ansfold or Mini-Motel brochures, adverts or magazine articles.
Also, any chassis numbers for the above caravans!

knockdolian
Posts: 43
Joined: Wed, 01 Feb 2017, 8:43 pm
Location: Yeovil, Somerset

Re: Ride height

Post by knockdolian » Tue, 24 Aug 2021, 6:22 pm

Can you not fit a tow ball relocation plate or an adjustable tow ball ?

JamesM
Posts: 3
Joined: Tue, 03 Aug 2021, 7:41 pm
Location: Winchester, Hampshire

Re: Ride height

Post by JamesM » Wed, 25 Aug 2021, 12:44 pm

Thanks for the tips, I'll look into finding some 12" wheels (there's lots of space around my 10" ones).

My landy's rear cross-member is 20" off the ground, a long towbar drop plate brings two challenges: firstly I lost most of my ground clearance (meaning I need to make it removeable, or it'll remove itself the first time I go over a rock!) and secondly there's a lot of torsion from the leverage on the drop-plate.

knockdolian
Posts: 43
Joined: Wed, 01 Feb 2017, 8:43 pm
Location: Yeovil, Somerset

Re: Ride height

Post by knockdolian » Wed, 25 Aug 2021, 2:41 pm

I was thinking more of the adjustable / removable type.

Post Reply

Who is online

Users browsing this forum: No registered users