The 11th International Portafold & Ansfold Gathering (i.e. 2019)

Following the huge success of the 10th International Gathering we'll be at Retrofestival again. It's a massive show now and is popular with everyone.

It's held at the Newbury Showground, Priors Court, Hermitage, Thatcham, West Berkshire, RG18 9QZ; on the weekend of the 9th, 10th & 11th of August 2019.

Don't book with the organisers, just contact me to get your pitch saved.

Spare wheel attach ?

Anything you've created that didn't come out of the factory.
Post Reply
70sfreak
Posts: 24
Joined: Sun, 04 Mar 2012, 3:54 pm
Location: Aldershot, Hampshire

Spare wheel attach ?

Post by 70sfreak » Mon, 13 Aug 2012, 7:40 pm

How do you attach the spare on the frame ?
Mine does not have any brackets etc ?
Thanks, Steve

User avatar
TRUNNIONMAN
Posts: 19
Joined: Sun, 29 Aug 2010, 10:27 pm
Location: Willenhall, West Midlands

Re: Spare wheel attach ?

Post by TRUNNIONMAN » Mon, 13 Aug 2012, 10:42 pm

70sfreak wrote:How do you attach the spare on the frame ?
Mine does not have any brackets etc ?
Thanks, Steve
I was looking into this at last years national gathering as I find it a pain keep lifting the spare in & out when you are using the van (not to mention it can get messy if the ground is muddy) there are no brackets on the vans it has to be fabricated from scratch, ive seen them with the wheel facing both ways (depending on how the bracket is fabricated) i'm planning on doing this on mine in the near future I will try to post some pictures. :thumbup:

User avatar
phunkie hiboy
Posts: 78
Joined: Mon, 04 Jul 2011, 7:57 pm
Location: Lindford, Hampshire

Re: Spare wheel attach ?

Post by phunkie hiboy » Tue, 14 Aug 2012, 6:30 am

Something I forgot to feature in the restoration thread. I'll sort some pictures and add them to the thread. Steve, are you guys going to the Victory Wheelers event at the weekend?
Built without compromise by the more luck than judgement method

70sfreak
Posts: 24
Joined: Sun, 04 Mar 2012, 3:54 pm
Location: Aldershot, Hampshire

Re: Spare wheel attach ?

Post by 70sfreak » Tue, 14 Aug 2012, 9:06 pm

phunkie hiboy wrote:Something I forgot to feature in the restoration thread. I'll sort some pictures and add them to the thread. Steve, are you guys going to the Victory Wheelers event at the weekend?
Please do Chris :thumbup:

Chris not sure now about Vic Wheelers the missus has hurt her back , fingers crossed though

User avatar
phunkie hiboy
Posts: 78
Joined: Mon, 04 Jul 2011, 7:57 pm
Location: Lindford, Hampshire

Re: Spare wheel attach ?

Post by phunkie hiboy » Thu, 23 Aug 2012, 10:00 pm

Sorry I’ve taken so long, stuff going on. Anyway, some photos of our spare wheel bracket. Just fabricated a bracket that fits our wheel/tyre combination and bolts onto the front legs of the chassis. The wheel is secured with one wheel nut through the wheel and onto a stud on the bracket.
picture637_640_x_480.jpg
picture636_640_x_480.jpg
picture639_640_x_480.jpg
Built without compromise by the more luck than judgement method

Post Reply

Who is online

Users browsing this forum: No registered users