The 15th International Portafold & Ansfold Gathering) (i.e. 2024)

Our annual gathering will be returning to the Newbury Retrofestival.

So put the dates 9th, 10th & 11th of August 2024 in your diary now and get those dates booked off work early.

Show Address: Newbury Showground, Priors Court, Hermitage, Thatcham, West Berkshire, RG18 9QZ

Don't book direct with the show organisers it will cost you more money, just contact me (07771544419) to get your pitch saved.

Phunkie Project Portafold

Any questions about maintenance or the restoration of your Portafold or Ansfold.
Reggie
Posts: 14
Joined: Fri, 27 Mar 2009, 11:39 am
Location: Blackpool, Lancashire

Re: Phunkie Project Portafold

Post by Reggie » Fri, 24 Aug 2012, 8:42 am

Words fail me, this is one stunning Portafold ive loved this thread and well done ..

User avatar
phunkie hiboy
Posts: 79
Joined: Mon, 04 Jul 2011, 7:57 pm
Location: Lindford, Hampshire

Re: Phunkie Project Portafold

Post by phunkie hiboy » Fri, 24 Aug 2012, 6:26 pm

Thank you Reggie :thumbup:
Built without compromise by the more luck than judgement method

Isaacsman
Posts: 8
Joined: Sun, 24 May 2009, 8:32 pm
Location: Acharacle, Argyll, Scotland

Re: Phunkie Project Portafold

Post by Isaacsman » Thu, 27 Sep 2012, 1:00 pm

I recently covered a garage roof with this rubber membrane. I hadn't considered it for the Portafold but realise that the 2metre width cut into strips and glued would provide the ultimate seal at the joints and awning seals. I thought you might be interested. They suggest it has a life up to fifty years. http://www.rubberroofs.co.uk/
Mike

User avatar
phunkie hiboy
Posts: 79
Joined: Mon, 04 Jul 2011, 7:57 pm
Location: Lindford, Hampshire

Re: Phunkie Project Portafold

Post by phunkie hiboy » Fri, 28 Sep 2012, 6:13 am

Thanks, I'll look into that. What's on there at the moment is working well, but I can't see it lasting for ever.
Built without compromise by the more luck than judgement method

User avatar
phunkie hiboy
Posts: 79
Joined: Mon, 04 Jul 2011, 7:57 pm
Location: Lindford, Hampshire

Re: Phunkie Project Portafold

Post by phunkie hiboy » Fri, 10 Jul 2020, 7:21 am

It's great to see that after the small hiccup of pictures going missing, they're all back now, this thread is now complete again. Here's hoping that it will be of some use and help for those setting out to do the same, or similar, repairs on their new, or old, projects (Portafolds and Ansfolds). Ours has been in the hands of new owners for a few years now, and they are still enjoying it.
Stay safe everyone.
Built without compromise by the more luck than judgement method

Post Reply

Who is online

Users browsing this forum: No registered users