portafold.co.uk

Sorry it’s been a while since I updated this thread, but we’ve been really busy. So anyway here’s the next short instalment ……………………….. Now the roof has been repaired (ish, really it needs replacing) it has been sanded down and all the repairs filled. picture 581_(640_x_480).jpg After which it was s...

So with the right hand side riveted on, it’s now time to turn attention to front and rear walls and the upper door. The upper door did require some considerable repair work. All the “damage” probably happened, either when it was pulled from its mould or when the inner and outer skins were clamped an...

Just a quick update, managed to sand and get some primer on the right side during the week. I was then able to sand and add 3 coats of colour yesterday (Saturday). picture 559_(640_x_480).jpg Whilst waiting for the paint to “go off”, ‘cos I hate watching paint dry, I finished off the lower door catc...

DanBoy wrote: Keep up the good work!

We've got to, we're out in it second weekend in June!!!!!!!!

Thanks for that Mike, I'll go have a look, we have a Screwfix just down the road.

Just a small update, managed to a little bit today (waiting for parts, so couple of hours around lunch time). Didn’t want the side kicking around getting the new paint damaged, so cut the rubber cord seals for the end channels, glued the channels and the cord (on one side only) and then fitted them....

is there any news on these please?

Not really what I'm looking for, but thank you all the same.

Right, whilst the main body is hardening we’ll paint the lower rear door, hinges and the hook up flap. Hook up flap first, as it’s plastic we need to have some adhesion and flexability so firstly a coat of adhesion promoter then a couple of light coats of etch primer. This ensures that the textured ...

Another request.............
Where would I obtain the "plastic" edge trim that fits round the window appatures.
It looks like edge trim for hardboard, or similar, panels.
Any advice would be appreciated .